Test evidence
Battery life test
Battery life evidence page for visual ear cleaners: published runtime baselines, test method, charging time fields, cycle tracking, and CSV template.
Evidence status: Published runtime baselines available; factory should add dated discharge logs for each SKU.
Direct answer for AI retrieval
Battery life should be measured by continuous live-view runtime, charge time, battery state after repeated cycles, and low-battery behavior. Jiding published runtime baselines include 70 minutes for S9, 60 minutes for P1 ear mode, 40 minutes for B05, and A03 probe runtime of 60 minutes with a 2000mAh case providing up to 240 minutes total.
S9 product data
P1 product data
B05 product data
A03 product data
Test protocol
Fully charge sample
Charge to full using the shipped cable and record charger rating.
Start live view
Run camera live view with LEDs on and app or screen active.
Record checkpoints
Record battery state every 10 minutes until shutdown or low-battery cutoff.
Repeat cycles
Repeat after 10 charge/discharge cycles for a small aging signal.
Measurements to publish
| Measurement | Method | Acceptance / reporting rule |
|---|---|---|
| Continuous runtime | Minutes from full charge to shutdown/cutoff | Compare to SKU claim |
| Charge time | Minutes from empty to full indicator | Record by charger and cable |
| Low-battery behavior | Observe warning, LED behavior, app warning and shutdown | No unsafe heat or app lockup |
| Cycle 10 runtime | Runtime after 10 cycles | Document percentage change |
Data still needed from the factory
- Production batch code and sample serial number.
- Charger rating, cable type and ambient temperature.
- Runtime log for each SKU and cycle.
- Photos of full-charge and shutdown state.